Yam Enterprise

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.

Description

The 1747-L551 processor module is an SLC 500 and SLC 5/05 series processor module that has been designed by Allen-Bradley/Rockwell Automation. It can be used with an Allen-Bradley 1747-M13 memory module which will give it up to 64K of backup memory capacity. The 1747-L551 processor module also has CMOS RAM that supports battery backup. Its maximum current capacity is 1 Amp at 5 Volts DC and 0 Amps at 24 Volts DC. The 1747-L551 processor module can support up to 32 connections at a time.

The Allen-Bradley 1747-L551 Processor Hardware is integrated with a program memory size of 16 KB. It is high-performance controller, capable of controlling up to 4096 input and output points. This module supports online and offline programming such as runtime editing. The Allen-Bradley 1747-L551 has channel-to-channel, remote I/O, and DeviceNet pass-thru features. This module also has a built-in real-time clock and calendar. This module comes with a Ethernet port for network connection and RS232 port for peer-to-peer communication. The RS-232 channel supports DF1 full duplex, DF1 half-duplex master and a DF1 radio modem. The integrated Ethernet port supports a built-in 10/100 Base-T Ethernet channel for supporting SNMP, BOOTP, extended messaging capabilities, and high-speed communication. For programming, it includes advanced math instructions and various additional instructions. It also includes support for indirect addressing. The SLC 505 has a typical Program Scan Time per Keyword of 0.9 milliseconds and typical I/O scan time of 0.225 milliseconds.

This module has a dielectric withstand of 150 Volts AC based on the UL 508, CSA C22.2 No. 142 Standards. The operating vibration of the 1747-L551 is 2.5G at 5 to 2000 Hertz. The non-operating vibration is 5G at 5 to 2000 Hertz. The isolation between the communication circuits of this module is around 500 Volts DC. The isolation between the backplane and the I/O of this module is 1500 Volts AC. Before installing and uninstalling I/O devices, disconnect the power from the controller and the other power sources that serve the I/O device. The operating temperature of the 1747-L551 is 32 to 140 degrees Fahrenheit, and the storage temperature is around -40 to 185 degrees Fahrenheit. The Allen-Bradley 1747-L551 has an operating shock of 30G (3 pulses, 11 milliseconds). The nonoperating shock is 50G (3 pulses, 11 milliseconds). The relative humidity is from 5-95% non-condensing. This module has a scan time typically around 0.9 milliseconds/K. Its LED light will indicate several different situations, including when the module is running, when the CPU experiences a fault, when the battery is low, an I/O is being forced, or when its Ethernet/RS-232 ports are active.

This processor is exclusively installed in Slot Zero (0) of the SLC 500 chassis. It supports Remote I/O implementation with the use of a communication adapter installed at the chassis where the CPU is located, and scanner modules installed at the chassis where the Remote I/O modules are described. Supported communication protocols are Ethernet, Remote I/O (RIO), DH485 and Data Highway Plus (DH+). It must be cleared that Remote I/O technology is different from Remote I/O (RIO) protocol. Remote I/) technology or sometimes referred to as Distributed I/O is the technology that allows installation of Input and Output modules away from the processor, through a remote chassis with the CPU still treating the remote modules as part of the local chassis. Remote I/O or most commonly referred to as RIO is a proprietary protocol by Allen-Bradley.

This processor, similar to other processors is designed with the capability of being communicated to computer-based control systems such as Human Machine Interface (HMI) and Supervisory Control and Data Acquisition (SCADA).

Digital signals from a programmable controller can be converted to
signals suitable for the connected devices such as a magnetic starter
(example: from 24VDC signal to 200VAC signal).
One terminal module supports connections with multiple devices with
different voltage loads.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.

The Allen-Bradley ControlLogix 1756-L62S is a GuardLogix Controller with 478 KB I-O Memory, 4 MB User Memory, 128000 Maximum I-O, 4000 Maximum Analog I-O, 128000 Maximum Digital I-O, and 3.5 Watts Power Dissipation.

The 1756-L62S is a communication protocol module by Allen-Bradley which features unique communication benefits. This module is a GuardLogix Controller with a 4 MB memory and a 6 MB safety memory. This GuardLogix controller module is a certified controller system for use in safety applications. This GuardLogix controller system supports both SIL3 and PLe safety applications. The GuardLogix controller clubs the primary controller and the safety partner for unified functioning. The model has a 4 MB memory for standard tasks while 1 MB memory dedicated for the safety tasks and other like components. The smart and efficient key switches are placed on the front of the primary controller which allows operation of the controller modes in a convenient way. The maximum I/O range of this 1756-L62S is 128,000 whereas the maximum analog I/O range is 4000. The current drawing capacity at 5.1V DC is 1200 milliamperes and at 24V DC is 14 milliamperes. It is worth noting that the power dissipation of this device is 3.5 Watts and the thermal dissipation is 11.9 BTU per hour. The continuous isolation voltage capacity is 30 Volts in this device. It has no enclosure. The unique quality of the 1756-L62S is that the chassis provides the physical connection between the GuardLogix controller and the modules.

SIMATIC S7-200 CN, CPU 224 Compact unit, DC power supply 14 DI DC/10 DO DC, 8/12 KB progr./8 KB data, PROFIBUS DP expandable this S7-200 CN product only has CE approva

The Allen-Bradley 1763-L16BBB is a MicroLogix 1100 Controller. This controller is powered by an external supply voltage of 24VDC with built-in Twelve (12) 24VDC discrete inputs, Two (2) 0-10 VDC analog inputs, Two (2) Relay Outputs, and Four (4) FET Outputs. This controller has a built-in RS232 and Ethernet communication interfaces.

The Allen-Bradley 1763-L16BBB is a Programmable Logic Controller (PLC) that is part of the MicroLogix 1100 product category. This controller is ideally used in micro or small automation requirements, compatible of being installed in a wide variety of applications such as machine and process automation.

The 1763-L16BBB has an internal power circuitry that requires an external supply voltage of 24VDC. It has a variety of input and output devices such as Ten (10) 24VDC discrete inputs, Two (2) 10VDC analog inputs, Two (2) relay outputs and Four (4) 24VDC FET outputs. The embedded input channels may be operated at 14 - 26.4VDC (+10%) at 65 °C/149 °F or 14 - 30VDC (+25%) at 30 °C/86 °F voltage range. Included in the Ten (10) input channels are Four (4) high-speed input channels, locates at channels 0-3. It accepts input switching frequency of 0 Hz-20 kHz or 0 Hz-40 kHz. Inputs 4 to 10 are standard DC inputs with switching frequency of 0Hz-1kHz.

The analog input channels are compatible for 0-10VDC input signals with resolution of 10-bit. It has an analog to digital converter that saves the converted data to 10-bit signed integer with input coding of 0 - 1023 units. Each of the channel has an overall accuracy of +/- 0.5% of and non-linearity of +/- 0.5% both in full-scale.

The 1763-L16BBB has a Field Effect Transistor (FET) output circuit type. Each channel is rated 24VDC while the relay output operate at 125 VDC with continuous current of 1.0A, 120/240VAC with continuous current of 2.5A.

The 1763-L16BBB has built-in RS232 and One (1) Ethernet communication interface. The RS232 ports is used for peer-to-peer communication while the Ethernet communication interface supports 10/100 Mbps communication rate, supporting networked and multi-node communication.

The 1763-L16BBB’s operating temperature range is around -4 to 149 degrees Fahrenheit, and it has an operational vibration of 1.5 G at a 30G 3-directional relay shock rate.

The 1763-L16BBB has a 24 Volts DC digital input and a two-relay 24 Volts DC FET outputs. The analog output impedance of the 1763-L16BBB is 210 kOhms at a 10-bit resolution. The 1763-L16BBB is a device that has been certified for use in Class 1, Division 2, Hazardous Locations, (Groups A, B, C, D). For hazardous applications locations, the 1763-L16BBB has a relay load of 360 Volts and a current of 3 Amps. For a non-hazardous location, it has a maximum control load of 720VA and a current of 5 Amps. The 1763-L16BBB uses an RS-232 and an RS-485 combo port for communication and an LCD that allows users to monitor data within the controller.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.

Description 

The 2094-BC01-M01-S is a 400 Volt class Integrated Axis Module from the Kinetix 6000 Motion control system. This IAM module operates at an input voltage of 360-480 Volts AC, 3-Phase. It delivers a continuous output current to bus of 9 Amperes and continuous output power to bus of 6 Kilowatts. This drive supports a common-bus follower with DC input voltage of 458-747 Volts DC. It comes with an integrated Safe Torque Off (STO) functionality.

The Allen-Bradley 2094-BC01-M01-S is a Kinetix 6000 multi-axis integrated power module that comes with a safe torque off feature. This 2094-BC01-M01-S Kinetix Drive contains an inverter and converter section. It comes with a 9 A inverter power and a 6 kW converter power, as well as a wattage of 3.9 kW. This 3-phase module has a voltage rating of 460V AC and a line frequency of 47-63 Hz. Mounting of the 2094-BC01-M01-S module is done via a power rail. The 2094-BC01-M01-S is a 400 volt-class drive. The input voltage of this Kinetix 6000 Multi-axis Servo Drive is 360-480V AC. Kinetix 6000 Multi-axis servo drives are designed to provide Kinetix Integrated Motion for the drive, motor and actuator applications.
The Allen-Bradley 2094-BC01-M01-S is a Kinetix 6000 multi-axis servo module. Specifically, this product is an integrated axis module that is used to receive feedback signals from compatible servo motors for conditioning and processing. This drive is compatible for use with a variety of Allen-Bradley drives, whether Kinetix or non-Kinetix rotary motors, such as Kinetix MP, Kinetix TL/TLY, Kinetix RDB, 1326AB, and the F-Series. It also supports Linear motors including LDC-Series, LDL-Series and Linear actuators particularly LDAT series.
Through the integrated SERCOS interface, the 2094-BC01-M01-S may be connected in linear or ring topology using Fiber optic media. This enables high-speed data communication and provides the highest susceptibility to electrical noise. Additionally, it may be partnered with SERCOS interface modules and cards such as the 1756-MxxSE ControlLogix SERCOM interface module; 1768-M04SE CompactLogix SERCOS interface module, and the 1784-PM16SE PCI card SERCOS PCI SoftLogix communication card.
The 2094-BC01-M01-S supports Safe Torque-Off (STO) functionality. This integrated safety feature is certified at ISO 13849-1 PLe/SIL3. If compliance to EN954-1 Category 3 is needed, an external safety relay may be needed. The STO’s main functionality is mainly used to prevent drive restart after the safety circuit is tripped.
Being part of the Kinetix 6000 multi-axis drives, the 2094-BC01-M01-S is able to deliver torque up to 250% of continuous rated current. Additionally, with an increased peak current, power supply and axis modules may be downsized.

The Allen-Bradley 1762-L40BWAR is a MicroLogix 1200 Programmable Logic Controller (PLC). This controller has Twenty (20) standard 24VDC inputs, Four (4) Fast 24VDC inputs and Sixteen (16) relay, outputs. For communication, it has an embedded 8-pin mini-DIN communication port supporting DF1, DH-485, ASCII, MODBUS protocols and a programming port located on the left side of the controller. This controller is powered by an external 100-240VAC supply voltage range.

The 1762-L40BWAR is a Programmable Logic Controller (PLC) from Allen-Bradley. This controller is a MicroLogix 1200 controller that is ideally used for implementing micro and small automation requirements.

The 1762-L40BWAR primarily features Two (2) communication interface, located on the controller’s front panel and left side. Both communication ports are 8-pin mini-DIN circular connectors. The front panel port is the primary port that may be used for communication with programming workstations, Human Machine Interfaces (HMI) and Supervisory Control and Data Acquisition (SCADA) systems. The programming port is used only for controller programming, online edits and test functions. This ports functions simultaneously which helps prevents removal of existing connection to the primary port when controller communication is needed to be established at the same time.

The 1762-L40BWAR’s embedded I/O channels include Twenty (20) standard 24VDC inputs, Four (4) Fast 24VDC inputs and Sixteen (16) relay outputs. The input channels are composed of Twenty (20) standard inputs located at input channels 4 and higher while fast inputs are located at channels 0-3.

The 1762-L40BWAR is power by an external voltage range of 100-240VAC at frequency of 47-63 Hz. It is designed to withstand inrush current ratings of 25A for 8 ms when supplied with 120VAC and 40A for 4 ms when powered by 240VAC supply. The controller’s power supply usage is 82 VA with power supply output of 600 mA at 5VDC and 500 mA at 24VDC. This controller is capable of providing sensor power with maximum of 400 mA and 400 400 µF at 24VDC.

Twenty of these inputs are 24 Volts DC and the other 4 are 24 Volts fast DC. The 16 outputs are relay outputs. This module needs either 120 to 240 Volts AC to operate and the heat dissipation is 22 W. There are two amounts of inrush current. Those are 25 Amps for 8 milliseconds at 120 Volts AC and 40 Amps for 4 milliseconds at 240 Volts AC. The power supply usage of this module is 82 VA. The input circuit type of this module is 24 Volts sink or source DC power. The output circuit type of this module is relay type. The operating temperature of the 1762-L40BWAR is 0 to 55 degrees Celsius. Keep this module in an area that has a temperature -40 to 85 degrees Celsius for storage. The 1762-L40BWAR has several agency certifications including the UL 508, C-UL under CSA C22.2 no. 142, Class I, Div. 2, Groups A, B, C, D (UL 1604, C-UL under CSA C22.2 no. 213), and the CE/RCM/EAC for all applicable directives. For the 1762-L40BWAR, the COM of the sensor supply is also internally connected to chassis ground. The 24 Volts DC sensor power source should not be used to power output circuits

The 1764-24BWA is a MicroLogix 1500 base unit that belongs to the Bulletin 1764 product family. It has a line power voltage requirement of 85-265 VAC, integrated Eight (8) 24VDC sink/source discrete inputs, Four (4) High-Speed inputs and Twelve (12) Relay Outputs. It has integrated RS232 communication ports for device communication.

The Allen-Bradley 1764-24BWA is a part of the MicroLogix 1500 Programmable Logic Controller (PLC). This part number is a base unit that houses the necessary MicroLogix 1500 modules such as processors and memory module. When installed with a 1764 processor, the base unit becomes a functional PLC.

The 1764-24BWA is an independently replaceable unit that allows the embedded I/O options to be maximized while the inventory stocking costs are minimized. It contains the power supply, communications port, and embedded inputs and outputs. The Bulletin 1764-24BWA Base Unit allows advanced communications with other devices via its Channel 0 port. It serves as an expansion I/O interface as required by an application. It comes with eight standard and four fast 24 Volts DC inputs and four 20 kHz high-speed inputs. The 1764-24BWA base requires a processor to function, it is compatible with either the 1764-LRP or 1764-LSP.

It has a 120 to 240 Volt AC-rated power line and 12 relays (two of which are isolated). It has an 88 VA power consumption, maximum load power of 22, and a power supply voltage of 85 to 265 Volts AC at 47 to 63 Hertz. It also has a 24 Volt DC Power Sensor specified at 400 mA or 400 µF capacitance maximum, powerful feature not available in other base units. The 1764-24BWA Base has product certifications for CE, C-Tick, UL, c-UL, and Class I Division 2 Hazardous Location operation. It slides together with the Bulletin 1764 Processor to form the complete controller. This assembly should not be mounted near power lines.

The Allen-Bradley 1764L24BWA is a MicroLogix 1500 base unit. This base unit provides a modular housing. This base unit may be installed with MicroLogix processors such as 1764-LSP and 1764-LRP. Additionally, this base unit may be installed with a Data Access Tool (DAT) such as 1764-DAT. Other compatible modules for installation to the base unit are memory modules and real-time clock.

The 1764-24BWA MicroLogix 1500 base unit features an integrated Eight (8) 24VDC discrete inputs, Four (4) High-Speed inputs and Twelve (12) Relay outputs. This base units requires minimum panel space during installation. It may be installed using a DIN rail or with the use of mounting screws. Recommended installation clearance is Two (2) inches on all sides of the controller. This is to ensure adequate ventilation.

The 1764-24BWA supports installation of expansion modules to enhance the integrated features of the base unit. Compatible expansion modules are 1769 Compact I/O modules. These modules may be directly installed as local I/O module. Additionally, this base unit further supports an extended configuration through an expansion rack. This accomplished with the use 1769 expansion cable.

The integrated communication port supports interface via DF1 protocol in Full or Half Duplex. It may be interfaced with an Advanced Interface Converter (AIC) are 1761-NET-AIC, 1761-NET-ENI, or to a DeviceNet network through with the use of DeviceNet Scanner module 1769-SDN. This same converter may also be used to multiplex the serial port on the base unit which allows simultaneous communication of Human Machine Interface (HMI), Supervisory Control and Data Acquisition (SCADA), programming workstation, device converters and gateways.

Overview

4 axes, 2-/3-/4-axis linear interpolation, 2 axis circular interpolation, control unit: mm/inch/degree/pulse, number of positioning data: 600/axis, max. output pulse, 1 Mpps, 40-pin connector x 2, differential driver output

Space-saving Integration for Compact machines and Small-scale Control cabinetsUltracompact Size

Ten-I/O-point AC models measure only 90 mm x 66 mm x 70 mm (H x W x D), and contain all basic PLC functions.

A Wide Variety of Models Handling from 10 to 100 I/O Points

By combining CPU Units having from 10 to 40 I/O points with 20-I/O-point Expansion I/O Units, CPM1A PLCs can be configured for 10 to 100 I/O points.

Programming by Programmable Terminal

Use of the optional Communications Adapter (RS-232C or RS-422 conversion) enables fast Host Link or NT Link communications with an OMRON Programmable Terminal. This makes it possible to program the CPM1A on the PT screen, greatly simplifying maintenance tasks.

High-speed Processing

Processing is fast, e.g., 0.7-μs AND LD / OR LD and 16.3-μs MOV instructions, allowing high-speed execution of even lengthy programs. Integrated interrupt and pulse catch inputs also handle high-speed pulses that occur within one program cycle.

Versatile Functions in a Compact Body

A large program capacity and instruction list handle even complicated control tasks with ease.
• User memory: 2,048 words
• Data memory: 1,024 words
• Timer/counter: 128 points
• Basic instructions: 14 types
• Application instructions: 79 types
• Analog setting dials: 2 points (built-in)

Pulse Output

CPM1A CPU models with transistor outputs can output pulses with a maximum frequency of 2 kHz. Combining these models with a Stepping Motor Driver or Servo Driver enables easy positioning operation.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.

SIMATIC IPC427D (Microbox PC), HD graphic onboard, 2x10/100/1000 Mbit/s Ethernet RJ45, 4xUSB V3.0 (high current), PCIe (optional), 24 V DC power supply Core i7-3517UE; 2x Gbit Ethernet (IE/PN); PROFIBUS DP 12; Vertical mounting; 4 GB with NVRAM; 1x RS-232; 1x PCIE; WIN Embedded Standard 7, 32-bit Replaceable without drive; SSD 240 GB Standard (MLC); WinAC RTX 2010 SP2
JC-Electronics is not an official authorized distributor for Siemens. The original manufacturer's warranty does not apply. Instead, we offer you a 2-year warranty according to our JCertified guidelines.

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.

The extensive portfolio of scalable embedded control hardware flexibly extends centralized and decentralized automation topologies. The system can be integrated with the Sercos automation bus and other fieldbus and Ethernet-based protocols. Optional safety function/expansion modules enable easy expansion to include SafeLogic control

We are engaged in offering to our clients. Our range of all products is widely appreciated by our clients.